DISA 250 AUX. EQUIPMENT
Sand Supply Unit
- The Sand Supply Unit is designed for keeping the DISA 250 series supplied with sand.
- It is fed from the foundry's sand preparation plant.
- The sand hopper is lined with stainless steel plates and has sufficient capacity to function as a buffer in the event of brief sand supply interruptions.
- The hopper may be emptied by reversing the draw-off belt.
Automatic Core Setter (CSE)
- Automatic core setting device for fast and accurate production of high-quality cored castings.
- Operator manually feeds the cores into the core mask where they are retained by vacuum.
- The cores are automatically and accurately set into the cavity of the last mould produced.
- The core setting procedure can be facilitated even more using an automatic core feeding.
(Please click here to see the Automatic Core Setter sequence)
Precision Mould Conveyor (PMC)
- High-precision system, synchronised with the moulding machine.
- Supports and conveys the mould string from the moulding machine through the pouring, solidifying and cooling zones.
- Entire mould string is kept at the same level throughout transportation.
- Built-in Mould Side Supports mean high mould surface utilisation and increased casting accuracy.
(Please click here to see the Precision Mould Conveyor sequence)
Synchronised Belt Conveyor (SBC)
- Extends the total cooling length (consisting of PMC and SBC) up to 120 m.
- Mould gaps are avoided at the critical transition point between the PMC and the SBC.
(Please click here to see the Synchronised Belt Conveyor sequence)
Mould Side Supports (MSS)
- Mould Side Supports (MSS) form part of the DISA 250-C Precision Mould Conveyor (PMC).
- The MSS support the sand moulds to obtain a higher degree of utilisation of the moulding area.
- The MSS are pneumatically operated, and the activating force is centrally adjusted from the MSS valve cabinet.
Automatic Pattern Changer Unit (APC)
Change of pattern plates within a cycle time extension of 60 seconds maximum.
APC can be installed on either the right-hand or left-hand side of the DMM, but must always be opposite to the core setter (CSE), if installed.
(Please click here to see the Automatic Pattern Charger sequence)
Optional additions and accessories: