| Moulding capacity uncored (moulds/hour) |
160 |
| Moulding capacity cored (moulds/hour) |
120 |
| Squeeze pressure at mould face |
1.2–10.0 kp/cm2/17-145 psi |
| Shot pressure |
0.0–4.5 kp/cm2/0–65 psi |
| Electrical requirementsPower supply in accordance with IEC 204-1 standardLine voltage |
Three phase with protector ground between 200 and 575 V AC ( 10%), or 50 or 60 Hz ( 2%) in accordance with buyer’s specifications |
| Control voltage |
24 V DC voltage transformer is installed in the control cabinet of the DMM |
| Average consumption |
21 kW |
| Connected load |
32 KVA |
| Moulding sand requirements 150 mm/5.9 mould thickness |
23 tons/hour 25 US tons/hour |
| 175 mm/6.9 mould thickness |
27 tons/hour 30 US tons/hour |
| 200 mm/7.9 mould thickness |
31 tons/hour 34 US tons/hour |
| Pneumatic requirementsMax compressed air (5 bar/73 psi) |
2 m3/min/71 cfm |
| Max free air (1 bar/15 psi) |
10 m3/min/353 cfm |
| Hydraulic fluid |
250 l/66 US gallons |
| Net weight |
14 tons/15.4 US tons |